These work gloves are designed to withstand the stresses that arise during demolition work and other heavy craft tasks. The palms and fingertips are reinforced with Armortex® material, which increases durability and protects against wear.

The gloves are equipped with Smartswipe™ technology, which makes it possible to use touchscreens without taking them off. The inside has a breathable tri-cot lining, which contributes to comfort and ventilation during use.

In addition, they have extra protection over the knuckles, a sweat-absorbing area, and an adjustable Velcro closure that ensures a good fit. The gloves meet the requirements of CE category 2 as well as standards EN 420 and EN 388 (2221).

Milwaukee HI-DEX CUT D is a cut-resistant glove made from an 18G material that provides a thin and flexible construction with high mobility. The glove is developed for precision tasks where both protection and mobility are crucial.

The palm is coated with polyurethane, which provides a good grip while maintaining low weight. The material is breathable, so the glove can be worn comfortably throughout the workday.

Between the thumb and index finger, there is a nitrile reinforcement that increases durability in an area that is often exposed to stress. The glove is also equipped with SMARTSWIPE™ fingertips that make it possible to use touchscreens without removing the gloves.

The product can be washed up to five times without losing its properties, which extends its lifespan and reduces waste. The glove is certified according to EN ISO 21420 and EN388:2016 (4X42D) and approved according to UKCA, EAC, and Ukrainian standards.

Guide Work Glove 5112 in size 8 is made of synthetic leather and designed to provide a good balance between durability and mobility. The half-lined construction makes the glove comfortable to use for longer periods.

The glove has a pre-curved fit that follows the natural shape of the hand and a reinforcement over the knuckles that increases comfort and protects against impacts. The padded palm and the semi-short cuff contribute to a comfortable and flexible fit.

An elastic at the wrist ensures that the glove fits tightly and securely during use. The model is tested according to EN 388 2111X, EN 407 X1XXXX and EN 21420, which documents its level of protection and quality.

Milwaukee Gloves Cat. 3 are developed to provide effective protection against cuts and sharp objects. The gloves have a cut resistance of Level 3, making them suitable for work involving materials with sharp edges.

The surface is designed to provide a secure grip, allowing the user to work precisely and steadily, even under demanding conditions. The gloves are also equipped with SMARTSWIPE� technology in the palm and fingertips, making it possible to use touchscreens without removing the gloves.

This model comes in size XXL/11 and in a pack of 12 pairs, making it suitable for both professionals and companies that need multiple sets for work use.

Guide 5112 is a half-lined work glove designed to provide both protection and comfort during demanding tasks. The glove is made of synthetic leather, which provides a good balance between durability and flexibility.

The pre-curved fit and reinforcement over the knuckles contribute to natural movement and increased durability, while the padded palm provides extra comfort during extended use. The cuff is designed in a semi-short model, making the glove easy to put on and take off.

An elastic band around the wrist ensures that the glove fits snugly and securely during work. The model is tested according to standards EN 388 2111X, EN 407 X1XXXX and EN 21420, which document its protective properties against mechanical and thermal stresses.

Milwaukee Impact Protection Gloves Cut E in size 11/XXL are designed to protect hands from both cuts and impacts. They are made with an impact-resistant material on the back of the hand and fingers that reduces and absorbs shocks during work.

The gloves have a reinforced nitrile coating that provides extra protection between the thumb and fingers. The nitrile material ensures an excellent grip, even under demanding conditions with oil or high temperatures.

The SMARTSWIPE™ feature in the palm and fingertips allows the use of touchscreens without removing the gloves, increasing work efficiency.

The gloves are certified according to European standards for cut resistance, impact, and heat protection: EN ISO 21420, EN388:2016 (4343EP), and EN 407 (X1XXX).

The Guide Work Glove GUIDE 44 is a versatile glove made of goatskin, providing a good balance between durability and flexibility. The material makes the glove suitable for tasks where both protection and mobility are important.

The back is made of cotton, which contributes to breathability and comfort during extended use. The glove closes with Velcro at the wrist, allowing the fit to be adjusted as needed.

The model covers sizes from 6 to 13 and is tested according to the EN 388 2022X standard, which specifies resistance to mechanical risks. This makes it suitable for general craft work, assembly, and light industrial tasks.

Milwaukee HI-DEX CUT C is a cut-resistant glove developed for tasks where precision and safety must go hand in hand. The glove is made of an 18G material that provides a thin and flexible construction that maintains high mobility during work.

The palm is coated with polyurethane, which provides a good grip while maintaining breathability so that the hands remain comfortable during prolonged use. Between the thumb and index finger, there is a nitrile reinforcement that increases durability in a vulnerable area.

The fingertips are equipped with SMARTSWIPE™ technology, which makes it possible to use touchscreens without removing the gloves. The gloves can be washed up to five times, extending their lifespan and reducing waste.

The product is certified according to EN ISO 21420 and EN388:2016 (3342C) and approved under UKCA, EAC, and Ukrainian standards, documenting its level of protection and quality.

Guide 2000W is a winter-lined glove made of full-grain leather, providing a robust and durable surface while maintaining good dexterity. The glove is fully lined to ensure warmth and comfort when working in cold environments.

The material consists of goatskin leather, known for its combination of strength and flexibility. The open cuff makes it easy to take the glove on and off while providing good ventilation around the wrist.

The glove is designed for general craft work and meets the requirements of the EN 388 standard with a 2121X rating, indicating its resistance to abrasion, cutting, tearing, and puncture.

The size range covers from 7 to 12, making it possible to find a suitable fit for different hand sizes.

Milwaukee Impact Resistant Gloves CAT 3 M/8 are developed for users who need effective hand protection when working with tools and materials where there is a risk of impact. The gloves are made of durable materials and have reinforced areas that protect against shocks and pressure.

Size M/8 fits medium-sized hands and provides a snug yet flexible fit that allows for good dexterity during work. The construction is designed for professional use where both safety and freedom of movement are important.

As part of Milwaukee's range of protective equipment, the glove belongs to the CAT 3 class, which indicates a high level of protection against mechanical impact. It is suitable for craftsmen, fitters, and other professionals working in environments with a risk of impact or heavy strain on the hands.

Guide 775W is a wind and waterproof work glove designed to protect the hands under demanding conditions. It is made with synthetic leather in the palm, providing a stable and secure grip on tools and materials.

The glove is fully lined, which contributes to warmth and comfort, especially when working in cold environments. The combination of a lined interior and waterproof exterior makes it suitable for both outdoor and indoor use where moisture and cold can be a challenge.

The model covers sizes from 6 to 13 and meets the requirements of standards EN 388 1121X and EN 511 X2X, which document its level of protection against mechanical and cold-related impacts.

Milwaukee Work Gloves Leather M/8 are made of durable leather that provides good protection against mechanical wear while maintaining some flexibility so that the hands can move freely during work.

The gloves are designed to withstand daily use in demanding environments where grip, durability, and comfort are crucial. The leather material contributes to a natural fit that shapes to the hand over time.

This model in size M/8 fits users with medium-sized hands and is suitable for a wide range of manual tasks, including construction, assembly, and maintenance.

Guide 1951 is a heavy-duty, half-lined work glove made of soft and durable cowhide, providing a good balance between flexibility and durability. The glove is designed for tougher tasks where the hands need protection from wear and impact.

The back of the hand is made of cotton, which contributes to breathability and comfort during use. The inside is partially lined with cotton, providing a comfortable fit and reducing the risk of irritation during prolonged use.

To increase protection, there are extra reinforcements on the fingers and knuckles, and the glove is equipped with a safety cuff that protects the wrist from chafing and impacts. The glove meets the requirements of standards EN 388 3143X and EN 407 X2XXXX, which document its resistance to mechanical and thermal stress.

Milwaukee GLOVES IMPACT PROTECTION CUT 5/E - L/9 are designed to protect hands against both impacts and sharp objects. The gloves are made with an impact-resistant material on the back of the hand and over the fingers, which reduces and absorbs shocks during work.

The double nitrile coating increases durability and provides an effective barrier against sharp edges and rough surfaces. At the same time, the coating contributes to a good grip, even under demanding conditions.

Reinforced areas in nitrile provide extra protection and wear resistance, making the gloves suitable for use in environments where you work with metal, tools, or heavy materials.

Size L/9 fits most standard-sized hands and ensures a good balance between mobility and protection.