The Siemens Circuit Breaker 10kA 1P+N C 4A is part of the Siemens 5SY4 series, designed to protect electrical installations from overload and short circuit. It has a breaking capacity of 10 kA and a C characteristic, making it suitable for general circuits with moderate inrush currents.

The circuit breaker is 1+N pole and designed for 230 V installations. The compact design with an installation depth of 70 mm makes it easy to integrate into standard switchboard systems. It is mounted on a DIN rail and can be combined with various accessories such as remote switches, residual current modules, and signal modules.

The product is manufactured according to the IEC 60898 standard, ensuring compatibility and safety in low-voltage installations. This makes it suitable for residential, commercial, and industrial environments where reliability and flexibility are required.

The Schneider Electric Acti9 iC60N miniature circuit breaker is designed to protect electrical circuits against short-circuit currents and overloads. It has four poles (3P+N) and a rated current of 32 amperes, making it suitable for many types of low-voltage installations.

The circuit breaker has a C characteristic, meaning it reacts quickly in the event of a short circuit but also allows short-term inrush currents from motors and similar loads. The double terminal allows separate connection of cable and busbar, making installation and maintenance easier.

With the VisiTrip™ indicator, faults can be quickly located, as a visual marking on the front shows which device has tripped. The VisiSafe™ function ensures that the circuit is completely disconnected when the switch is in the open position, increasing safety when working on the installation.

The device has a compact design with a width of 72 mm and meets the requirements of standards IEC/EN 60898-1 and IEC/EN 60947-2. The terminals are IP20B protected, reducing the risk of contact with live parts during installation and operation.

The Eaton Circuit Breaker 16A 3P+N C 4M 6KA is a compact and efficient protective switch that protects electrical circuits from overload and short circuit. It is intended for use in residential and commercial installations where reliability and safety are required.

The circuit breaker has a C characteristic, which means it is suitable for circuits with moderate inrush currents, such as lighting, sockets, and small motors. The four-pole design (3P+N) makes it suitable for three-phase systems with a neutral conductor.

With a breaking capacity of 6 kA and a rated current of 16 amperes, it provides stable and safe disconnection in the event of fault currents. The product features a modular design with four modules (4M), which facilitates installation in standard switchboards.

The Hager Miniature Circuit Breaker 3P+N 50A C-Characteristic is a four-pole circuit breaker designed for use in switchboards and distribution panels. It protects electrical circuits from overcurrent and short circuit and is suitable for installations where both phase and neutral disconnection are required.

The circuit breaker has a rated current of 50 amperes and a C tripping characteristic, which means it reacts quickly in the event of a short circuit but allows short-term inrush currents, e.g. from motors. It is rated for a breaking capacity of 6 kA and occupies four module units (4M) in the panel.

The product is part of Hager’s range of modular protection components, known for their operational reliability and compatibility with standardised switchboard systems.

The ABB S202-C6 is a 2-pole miniature circuit breaker with C characteristic, designed to protect electrical circuits against overcurrent and short circuit. It has a rated current of 6 amperes and a breaking capacity of 6 kA according to standard EN60898.

The fuse is intended for use in 230/400V AC installations and can also handle up to 60V DC per pole. It is designed to operate stably within a temperature range of -25 °C to 55 °C, making it suitable for both residential and industrial environments.

With a width of 35 mm and an installation depth of 68 mm, it fits on standard 35 mm DIN rails. The product has IP20 protection and belongs to protection class III, providing a safe and reliable level of electrical insulation.

The miniature circuit breaker is part of the ABB S200 series, known for its modular design and easy installation. It can be used in control cabinets where precise and rapid disconnection in the event of fault current is required.

The Siemens Circuit Breaker 6kA 1P C 10A is a compact and robust protective switch that protects electrical circuits from overload and short circuit. It has a breaking capacity of 6 kiloamperes and is intended for use in 230/400 V AC systems.

The circuit breaker is single-pole and has a C characteristic, which means it is suitable for circuits with moderate inrush currents, such as lighting and standard sockets. The rated current is 10 amperes, making it suitable for standard installations in residential and commercial environments.

With an installation depth of 70 mm, it fits into most panel systems and can be easily integrated into existing installations. The Siemens design ensures stable and reliable operation over time.

The Schneider Electric Acti9 iC60N 3P 32A is a miniature circuit breaker designed to protect electrical circuits against short-circuit and overload currents. It has three poles and a rated current of 32 amperes, making it suitable for many types of installations in low-voltage systems.

The circuit breaker has a C characteristic, which means it reacts quickly to high currents but also allows short-term inrush currents from motors and similar loads. The double terminal design allows separate connection of cable and busbar, making installation and maintenance easier.

The Acti9 series is equipped with a VisiTrip™ indicator that shows when the device has tripped, as well as the VisiSafe™ function, which increases safety when working on the switchboard. The terminals are IP20B protected to prevent accidental contact with live parts.

The product complies with international standards such as IEC/EN 60898-1 and IEC/EN 60947-2 and is manufactured in accordance with the RoHS directive. With a width of 54 mm and a weight of 375 g, it is compact and easy to integrate into existing switchboard systems.

The Eaton Circuit Breaker 32A 3P+N C 4M 6KA is a compact and efficient protective switch that protects electrical installations from overload and short circuit. It is intended for use in residential buildings, offices, and commercial premises where operational safety and secure disconnection are required.

The switch has a C characteristic, which means it is suitable for circuits with moderate inrush currents, such as lighting, sockets, and small motors. The four-pole design (3P+N) makes it suitable for three-phase systems with a neutral conductor.

With a breaking capacity of 6 kA and a rated current of 32 amperes, it provides stable and safe protection against electrical faults. The product features a modular design that fits into standard DIN rail distributions, making installation simple and flexible.

The Hager Miniature Circuit Breaker 3P 16A C Type 6kA is a three-pole circuit breaker used to protect electrical installations from overcurrent and short circuit. It is designed for AC systems with a voltage between 230 and 400 volts.

The circuit breaker has a C characteristic, which means it is suitable for circuits with moderate inrush currents, such as lighting, sockets and small motors. The rated current of 16 amperes makes it suitable for typical loads in residential and commercial areas.

With a breaking capacity of 6 kA, it can handle short-term fault currents without damage, and its modular design makes it easy to install in standard distribution systems. The product is supplied as a single unit and is part of Hager's modular protection component series.

The Siemens 5SY6640-7 is a miniature circuit breaker used to protect electrical circuits from overload and short circuit. It is designed for a rated current of 40 amperes and has a breaking capacity of 6 kiloamperes according to EN 60898.

The fuse is designed as a four-pole model (3P+N), making it suitable for three-phase installations with a neutral conductor. It can be used in both commercial buildings and industrial environments where operational safety and standardised protection are required.

The device is halogen-free and meets the requirements for main switches according to EN 60204-1, making it suitable for use in machine installations and control cabinets where safety and material selection are crucial.

The Schneider Electric Acti9 iC60N 2P 32A is a circuit breaker that protects electrical installations from both short-circuit and overload currents. It is equipped with double terminals that allow both cables and busbars to be connected separately, making installation and maintenance easier.

The circuit breaker has a C characteristic and a rated current of 32 amperes at 230 volts. It has a short-circuit breaking capacity of 6/10 kA, making it suitable for many types of standard installations in buildings and control cabinets.

The product is equipped with Schneider Electric's patented VisiTrip™ indicator, which shows when the device has tripped, as well as the VisiSafe™ function, which increases safety during maintenance work. The terminals are IP20 protected to prevent accidental contact with live parts.

The Acti9 iC60N series complies with both IEC/EN 60898-1 and IEC/EN 60947-2 standards, ensuring compatibility and reliability in professional electrical installations.

The Hager miniature circuit breaker 1P 16A C characteristic 6kA is a single-pole circuit breaker that protects electrical circuits against overload and short circuit. It is intended for installation in distribution boards and is suitable for both residential and commercial applications.

The circuit breaker has a rated current of 16 amperes and a C characteristic, which means it can handle moderate inrush currents, for example from motors or lighting systems, without unnecessary tripping.

With a breaking capacity of 6 kA, it can safely interrupt high short-circuit currents and is designed for operating voltages between 230 and 400 volts AC. The device occupies one module width in the distribution board (1M).

The product is part of Hager’s range of modular protection components, known for their reliability and easy installation on standard DIN rails.

The Siemens 5SY6632-7 is a miniature circuit breaker from the SENTRON series, designed to protect electrical installations from overload and short circuit. It has a switching capacity of 6 kA and is designed for 400V systems.

The switch is 3+N-pole and has a rated current of 32 amperes with a C characteristic, making it suitable for circuits with moderate inrush currents, such as motors and lighting systems.

The device has an installation depth of 70 mm and is constructed with a uniform modular system that allows easy installation and expansion with accessories as needed.

With its robust design and renowned Siemens quality, this circuit breaker ensures stable and safe operation in many types of electrical installations.

The Schneider Electric C120N 3P 100A is a three-pole circuit breaker used to protect electrical circuits from short-circuit and overload currents. It is designed to meet the requirements of IEC/EN 60947-2 and is suitable for use in industrial environments.

The circuit breaker has a rated current of 100 amperes and a C characteristic, which means it reacts quickly to high current peaks while allowing short-term inrush currents from motors and similar loads.

With a breaking capacity of 10 kA at 230/400 V and IP20 protection, it is suitable for installations where both safety and operational reliability are required. It can also be equipped with auxiliary units for fault tripping and indication.

Compact dimensions with a width of 81 mm, a height of 73 mm, and a weight of 615 g make it easy to integrate into switchboards and distribution systems.

The Siemens Circuit Breaker 230V 10kA 1+N-P C 16A is designed to protect electrical systems from overcurrent and short circuit. It is part of the Siemens 5SL series, known for its operational reliability and easy installation in modular switch cabinets.

The circuit breaker has a rated current of 16 amperes and a breaking capacity of 10 kiloamperes, making it suitable for both residential and small commercial installations. It uses a C characteristic, meaning it reacts quickly to short circuits but allows short-term inrush currents, e.g. from motors.

With its 1+N-pole design, it protects both phase and neutral conductors and can be combined with additional modules such as auxiliary contacts, fault indicators, or remote trippers. This makes it flexible in use and easy to adapt to different installation requirements.

The circuit breaker has a compact design that fits into standard DIN rail switch cabinets and is made from materials that ensure long service life and stable function under varying loads.

The Schneider Electric Acti9 iC60N miniature circuit breaker is designed to protect electrical circuits against short circuits and overloads. It features 3 poles plus neutral (3P+N) and is rated for 10 amperes at 230 volts.

The device is equipped with a C-curve characteristic, making it suitable for circuits with moderate inrush currents, typically found in standard installations and small motor loads.

The circuit breaker has double connection terminals that allow separate connection of cable and busbar. This facilitates installation, maintenance, and replacement in distribution boards.

With the VisiTrip™ indicator, faults can be quickly located, while the VisiSafe™ function increases safety by indicating when the circuit is completely isolated. The terminals are IP20B-protected to prevent accidental contact with live parts.

The product complies with international standards IEC/EN 60898-1 and IEC/EN 60947-2 and is manufactured in accordance with the RoHS directive.

The Siemens Circuit Breaker 10kA 1P+N C 6A is part of the Siemens 5SY4 series, designed to protect electrical circuits from overload and short circuit. It has a breaking capacity of 10 kA and a C characteristic, making it suitable for general installations with moderate inrush currents.

The circuit breaker is 1+N pole and designed for 230 V installations. The compact design with an installation depth of 70 mm makes it easy to integrate into standard switchboard systems. It is mounted on a DIN rail and can be combined with various accessories such as remote switches, residual current modules, and signal modules.

The circuit breaker is manufactured according to the IEC 60898 standard, ensuring compatibility and safety in low-voltage installations. It is suitable for residential, commercial, and industrial environments where reliability and fast disconnection in case of fault currents are required.

The Schneider Electric Acti9 iC60N 1P+N 4A is a circuit breaker designed to protect electrical circuits against short-circuit and overload currents. It uses a C characteristic, making it suitable for standard installations with moderate inrush currents.

The circuit breaker features double terminals that allow separate connection of cable and busbar. This facilitates installation, maintenance and possible replacement. The terminals are IP20 protected, reducing the risk of accidental contact with live parts.

The product is equipped with Schneider Electric's patented VisiTrip™ technology, which provides a visual indication on the front when the device has tripped due to a fault. At the same time, the VisiSafe™ function contributes to increased safety when working on the installation.

The Acti9 iC60N series complies with both IEC/EN 60898-1 and IEC/EN 60947-2 standards, ensuring compatibility and reliability in professional electrical installations.