Pruning shears – an overview of features and types
Pruning shears – an overview of features and types
A good pruning shear is indispensable for any gardener. Whether you need to shape bushes, cut dead branches, or maintain flower beds, the right shear makes the job both easier and more precise. The selection is large, and there are many types and features to choose from – from simple manual models to advanced battery-powered solutions.
In this article, you’ll get an overview of what to consider when choosing pruning shears, as well as an introduction to the different types and brands available on the market.
The article presents a wide range of pruning shears representing different types, features, and price ranges. The aim is to provide an informative overview so you can more easily assess which type best suits your gardening needs. The product descriptions are based on publicly available information from manufacturers and retailers and are summarised to give a clear picture of the key features.
Factors to consider when buying pruning shears
When choosing pruning shears, it’s important to consider functionality, ergonomics, and the type of work you’ll be doing. Here are some of the most important factors to keep in mind.
1. Cutting type and mechanism
There are two main types of pruning shears: bypass and anvil. A bypass shear works like ordinary scissors, where the two blades glide past each other to make a clean cut – ideal for fresh branches and flowers. An anvil shear has one blade that presses against a flat surface, making it better suited for dry or hard branches.
2. Ergonomics and comfort
A good pruning shear should fit comfortably in your hand. Ergonomic handles, rubber coatings, and spring mechanisms can reduce strain on wrists and fingers. If you prune a lot, it may be beneficial to choose a model with an adjustable grip or rotating handle.
3. Cutting diameter
Check how thick branches the shear can handle. Most manual pruning shears can cut branches up to around 20–25 mm, while more powerful models or loppers can handle more. Consider what you primarily need the shear for before choosing.
4. Materials and maintenance
Blades made of hardened steel or stainless steel stay sharp longer and are easier to clean. Some models have replaceable blades, which extends their lifespan. Remember to clean and oil the shear regularly to prevent rust and ensure a clean cut.
5. Extra features
Some pruning shears have features such as safety locks, adjustable spring tension, or shock absorption. Electric or battery-powered models can be helpful if you prune a lot or have reduced hand strength.
Products in focus
The Fiskars Pruning Shears with Bypass M (P921) are designed to provide an efficient and comfortable cutting experience when pruning fresh branches and plants. It uses PowerGear technology, which triples the power transmission and reduces the required hand force, especially for thicker branches.
The blades are made of hardened steel and have a rust-resistant, low-friction coating that ensures clean cuts and reduces resistance during use. The bypass blade makes it suitable for precision cutting of live plant material.
The handle is made of lightweight FiberComp material with SoftGrip details, which follow the natural shape of the hand and provide a secure and comfortable grip. A practical sliding lock protects the blades during transport and storage.
The shears are made without PVC and come with a 25-year warranty, underscoring the product's durability and quality.
- PowerGear mechanism: Increases cutting power and reduces strain on the hand.
- Precision-ground hardened steel blades: Retain sharpness over time and provide clean cuts.
- Low-friction coating: Reduces resistance and protects against rust.
- Ergonomic FiberComp handle: Lightweight and comfortable grip with SoftGrip details.
- Cutting capacity: Up to 24 mm in diameter.
- PVC-free construction: Made without PVC materials.
Pros and cons
- Efficient power transmission with PowerGear technology
- Ergonomic and lightweight handle with good grip
- Durable hardened steel blades with rust protection
- Suitable for precision cutting of fresh branches
- Long 25-year warranty
- Not intended for dry or very hard branches
- The medium size may be too small for very large hands
Pros and cons
Pros
- Efficient power transmission with PowerGear technology
- Ergonomic and lightweight handle with good grip
- Durable hardened steel blades with rust protection
- Suitable for precision cutting of fresh branches
- Long 25-year warranty
Cons
- Not intended for dry or very hard branches
- The medium size may be too small for very large hands
Pros
- Efficient power transmission with PowerGear technology
- Ergonomic and lightweight handle with good grip
- Durable hardened steel blades with rust protection
- Suitable for precision cutting of fresh branches
- Long 25-year warranty
Cons
- Not intended for dry or very hard branches
- The medium size may be too small for very large hands
Specifications
- Manufacturer: Fiskars
- Model: 1057173 (P921)
- Product type: Pruner with bypass
- Size: M
- Cutting capacity: 24 mm
- Blade material: Hardened steel with low-friction coating
- Handle material: FiberComp with SoftGrip
- Features: PowerGear mechanism, ergonomic design, rust-resistant, PVC-free
- Compliance standards: PVC-free
- Warranty: 25 years
- Width: 9.5 cm
- Depth: 4.4 cm
- Height: 28.5 cm
- Weight: 245 g
- EAN: 6411501111210
- Item number: 2957410
The Gardena EcoLine Secateur is a pair of pruning shears designed for precise and efficient cutting of flowers and small branches. It has a cutting capacity of up to 18 mm in diameter and uses bypass cutting technology, which provides clean cuts and protects the plants.
The shears are made with a focus on sustainability. The handle consists of plastic produced with over 80% recycled household waste, while more than 75% of the steel components used are made from recycled material. This provides a robust and durable tool with a timeless look.
The precision-ground stainless steel blades ensure sharp and reliable cutting performance. The ergonomic handle makes the shears comfortable to use, even during extended periods of garden work.
The EcoLine Secateur is equipped with practical features such as a sap groove and wire cutting function, and it can be locked with one hand for safe storage.
- Sustainable design: Made primarily from recycled materials.
- Precision blades: Stainless steel with bypass cutting technology for clean cuts.
- Ergonomic handle: Provides comfortable use during extended pruning.
- Practical features: Includes sap groove, wire cutting function, and one-hand lock.
- Cutting capacity: Up to 18 mm in diameter.
Pros and cons
- Eco-friendly choice with a high proportion of recycled materials
- Cuts precisely and cleanly thanks to the bypass principle
- Ergonomic and easy to handle
- Durable materials in stainless steel
- Not suitable for thicker branches over 18 mm
- May require regular cleaning to maintain cutting performance
Pros and cons
Pros
- Eco-friendly choice with a high proportion of recycled materials
- Cuts precisely and cleanly thanks to the bypass principle
- Ergonomic and easy to handle
- Durable materials in stainless steel
Cons
- Not suitable for thicker branches over 18 mm
- May require regular cleaning to maintain cutting performance
Pros
- Eco-friendly choice with a high proportion of recycled materials
- Cuts precisely and cleanly thanks to the bypass principle
- Ergonomic and easy to handle
- Durable materials in stainless steel
Cons
- Not suitable for thicker branches over 18 mm
- May require regular cleaning to maintain cutting performance
Specifications
- Manufacturer: Gardena
- Model: 12210-20
- Item number: 3053161
- EAN: 4078500057523
- Product type: Pruning shears (Secateurs)
- Cutting capacity: 18 mm (diameter)
- Blade material: Stainless steel
- Features: Bypass blade, ergonomic handle, one-hand safety lock, sap groove, wire cutting function
- Warranty: 25 years
The Bosch EasyPrune Cordless Garden Shears are compact, electric pruning shears designed to make gardening easier. They are equipped with Power Assist technology, which automatically adds extra power when resistance is detected, making it possible to cut branches up to 25 mm thick without much effort.
The shears are powered by a 3.6 V battery that provides up to 450 cuts per charge. The cordless design allows freedom of movement in the garden, and charging is done via the included micro-USB cable.
EasyPrune uses a bypass cutting system with two stainless steel blades that glide past each other to provide clean cuts that promote healthy plant growth. The built-in battery level indicator makes it easy to monitor the charging status.
Weighing only 490 grams and with an ergonomic design, the shears are suitable for extended use without unnecessary strain on the hand.
- Power Assist technology: Automatically adds extra power when resistance is detected for easier pruning.
- Bypass cutting system: Two stainless steel blades ensure clean cuts and healthy plant growth.
- Long battery life: Up to 450 cuts per charge with a 3.6 V battery.
- Cordless freedom: Provides flexibility to work anywhere in the garden.
- Lightweight and ergonomic: Only 490 g for comfortable handling.
Pros and cons
- Automatic power assistance reduces the need for hand strength
- Long battery life per charge
- Clean cuts with stainless steel bypass blades
- Lightweight and ergonomic design
- Easy charging via micro-USB
- Not suitable for very thick or hard branches over 25 mm
- The battery is built-in and cannot be replaced
Pros and cons
Pros
- Automatic power assistance reduces the need for hand strength
- Long battery life per charge
- Clean cuts with stainless steel bypass blades
- Lightweight and ergonomic design
- Easy charging via micro-USB
Cons
- Not suitable for very thick or hard branches over 25 mm
- The battery is built-in and cannot be replaced
Pros
- Automatic power assistance reduces the need for hand strength
- Long battery life per charge
- Clean cuts with stainless steel bypass blades
- Lightweight and ergonomic design
- Easy charging via micro-USB
Cons
- Not suitable for very thick or hard branches over 25 mm
- The battery is built-in and cannot be replaced
Specifications
- Manufacturer: Bosch
- Model: 06008B2102
- EAN: 4059952647401
- Product type: Electric, cordless pruning shears (secateur)
- Battery: 3.6 V lithium-ion
- Maximum cutting capacity: 25 mm
- Features: Power Assist, bypass blade, battery level indicator, stainless steel blade, up to 450 cuts per charge
- Included accessories: Micro-USB cable
- Compliance standards: EN 60745
- Sound pressure: 70 dB(A)
- Vibration emission: 2.5 m/s² (uncertainty K: 1.5 m/s²)
- Dimensions (W × D × H): 3.1 × 25 × 8.5 cm
- Weight: 490 g
The FELCO 13 Classic Secateurs are pruning shears developed for demanding pruning tasks where extra power and control are needed. They can be used with one or two hands, allowing the user to take advantage of the extended left handle arm to increase cutting power.
The shears are made of forged aluminium and rubber, providing a combination of low weight and high durability. The red handles ensure a good grip and make the tool easy to find in the garden.
The blade is made of hardened steel and can cut branches up to 30 mm in diameter. The micrometric adjustment mechanism allows precise adjustment of the cutting head, ensuring the shears maintain their efficiency over time.
Ergonomics are considered in every detail – from the shock-absorbing handles and anti-slip coating to the double-notched thumb rest, which provides a stable and comfortable grip during work.
- Flexible use: Can be used with one or two hands for increased cutting power.
- Durable materials: Forged aluminium and hardened steel ensure long life.
- Ergonomic design: Shock-absorbing and non-slip handles protect the wrist and provide comfort.
- Precise adjustment: Micrometric mechanism makes it easy to fine-tune the cutting head.
- Large cutting capacity: Handles branches up to 30 mm in diameter.
Pros and cons
- Can be used with both one and two hands for extra power
- Ergonomic and shock-absorbing handles
- Precise adjustment of the cutting head
- Robust construction in forged aluminium and hardened steel
- Lifetime warranty from the manufacturer
- May feel large for users with small hands
- The solid construction makes it slightly heavier than smaller models
Pros and cons
Pros
- Can be used with both one and two hands for extra power
- Ergonomic and shock-absorbing handles
- Precise adjustment of the cutting head
- Robust construction in forged aluminium and hardened steel
- Lifetime warranty from the manufacturer
Cons
- May feel large for users with small hands
- The solid construction makes it slightly heavier than smaller models
Pros
- Can be used with both one and two hands for extra power
- Ergonomic and shock-absorbing handles
- Precise adjustment of the cutting head
- Robust construction in forged aluminium and hardened steel
- Lifetime warranty from the manufacturer
Cons
- May feel large for users with small hands
- The solid construction makes it slightly heavier than smaller models
Specifications
- Manufacturer: FELCO
- Model: F13
- Item number: 3087519
- EAN: 0783929100173
- Product type: Pruner – large hand
- Length: 27 cm
- Weight: 310 g
- Cutting capacity: 30 mm (diameter)
- Blade material: Hardened steel
- Handle material: Forged aluminium/rubber
- Colour: Red handles
- Features: Shock-absorbing handles, non-stick coating, right-/left-handed, ergonomic handle, lockable, phthalate-free, anti-slip handle, sap groove, wire cutter, angled cutting head, one-handed operation, robust, extra-long left handle, double-notched thumb rest, micrometric adjustment mechanism
- Warranty: Lifetime warranty
The Gardena EasyCut 680 A is an anvil lopper developed to cut hard and dry wood with minimal effort. Its low weight and ergonomic grip make it comfortable to use, even during extended pruning sessions.
The precision-ground blades have a non-slip non-stick coating that ensures clean cuts and reduces friction during work. The anvil design means that one blade meets a fixed anvil, providing extra power when cutting tougher branches.
The shears have a maximum cutting diameter of 3.5 cm and feature a design with black and blue handles. They are suitable for general gardening tasks that require precision and control when pruning dry branches.
- Anvil lopper: Effective for pruning hard and dry wood.
- Non-stick coating: Reduces friction and ensures clean cuts.
- Lightweight: Makes work easier and more comfortable.
- Ergonomic grip: Provides good control during pruning.
- Cutting diameter: Up to 3.5 cm.
Pros and cons
- Lightweight construction that reduces fatigue during use
- Non-stick coating for smooth and precise cuts
- Suitable for hard and dry wood
- Ergonomic design with a good grip
- Not telescopic, so the reach is limited
- Less suitable for fresh or very thick wood
Pros and cons
Pros
- Lightweight construction that reduces fatigue during use
- Non-stick coating for smooth and precise cuts
- Suitable for hard and dry wood
- Ergonomic design with a good grip
Cons
- Not telescopic, so the reach is limited
- Less suitable for fresh or very thick wood
Pros
- Lightweight construction that reduces fatigue during use
- Non-stick coating for smooth and precise cuts
- Suitable for hard and dry wood
- Ergonomic design with a good grip
Cons
- Not telescopic, so the reach is limited
- Less suitable for fresh or very thick wood
Specifications
- Manufacturer: Gardena
- Model: 12004-20
- EAN: 4078500043403
- Item number: 2736841
- Construction: Anvil lopper
- Telescopic handle: No
- Maximum cutting diameter: 3.5 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
The Gardena EnergyCut 750 B is a lopper developed for demanding pruning tasks where extra power is needed. The built-in gear transmission significantly increases cutting power, allowing even thicker branches to be cut with less effort.
The shears are equipped with precision-ground blades that have a non-stick coating, which reduces friction and ensures clean cuts. This contributes to gentle pruning that minimises the risk of damage to the plants.
The handles are made of lightweight material and have an ergonomic design with a non-slip grip, providing good control and comfort during work. Buffers made of special plastic protect wrists and elbows by absorbing shocks during cutting.
With a maximum cutting diameter of 3.8 cm and a construction based on the bypass principle, this model is suitable for fresh wood and live branches, where a clean cut is important for the plant’s healing.
- Gear transmission: Increases cutting power when pruning thicker branches.
- Non-stick coating: Provides smooth cuts and reduces friction.
- Ergonomic design: Lightweight construction and non-slip grip for better comfort.
- Bypass construction: Ideal for fresh wood and live branches.
- Shock-absorbing buffers: Protect joints and reduce strain during use.
Pros and cons
- Effective gear transmission for increased cutting power
- Lightweight and well-balanced construction
- Non-stick coating on the blade for clean cuts
- Ergonomic handles with good grip
- Suitable for fresh wood and live branches
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Pros and cons
Pros
- Effective gear transmission for increased cutting power
- Lightweight and well-balanced construction
- Non-stick coating on the blade for clean cuts
- Ergonomic handles with good grip
- Suitable for fresh wood and live branches
Cons
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Pros
- Effective gear transmission for increased cutting power
- Lightweight and well-balanced construction
- Non-stick coating on the blade for clean cuts
- Ergonomic handles with good grip
- Suitable for fresh wood and live branches
Cons
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Specifications
- Manufacturer: Gardena
- Model: 12007-20
- EAN: 4078500043465
- Item number: 2736844
- Construction: Bypass (bypass lopper)
- Telescopic handle: No
- Maximum cutting diameter: 3.8 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
The Gardena 14776-55 electric pruner is a battery-powered telescopic pruner that allows you to trim branches at height directly from the ground. With an integrated extension tube, the tool can reach up to 3.6 metres, providing a total working height of around 5 metres.
The blades are made of hardened steel and have a non-stick coating that reduces friction and prevents branches from sticking. The maximum branch thickness the pruner can handle is 2.8 cm, making it suitable for pruning fresh wood.
A rotating cutting head with a 60-degree angle provides better access to difficult branches and a good overview during work. The ergonomic handle is equipped with an LED indicator that shows the battery's charge status.
The pruner is powered by an 18 V lithium-ion battery from the POWER FOR ALL system, which can be used across compatible Gardena products. The model is supplied without battery and charger, making it ideal for users who already have equipment in the same battery series.
- Telescopic function: Adjustable length up to 3.6 metres for high-level pruning.
- Efficient cutting capacity: Handles branches up to 2.8 cm in diameter.
- Non-stick coating: Reduces friction and makes cleaning easier.
- Rotating cutting head: Provides flexibility and precision when pruning.
- Battery operation: 18 V lithium-ion battery from the POWER FOR ALL system.
Pros and cons
- Long reach with telescopic function
- Ergonomic handle with LED battery indicator
- Non-stick coating on the blades
- Compatible with the POWER FOR ALL battery system
- Easy to store thanks to the detachable shaft
- Supplied without battery and charger
- Not suitable for very thick or hard branches
Pros and cons
Pros
- Long reach with telescopic function
- Ergonomic handle with LED battery indicator
- Non-stick coating on the blades
- Compatible with the POWER FOR ALL battery system
- Easy to store thanks to the detachable shaft
Cons
- Supplied without battery and charger
- Not suitable for very thick or hard branches
Pros
- Long reach with telescopic function
- Ergonomic handle with LED battery indicator
- Non-stick coating on the blades
- Compatible with the POWER FOR ALL battery system
- Easy to store thanks to the detachable shaft
Cons
- Supplied without battery and charger
- Not suitable for very thick or hard branches
Specifications
- Manufacturer: Gardena
- Model: 14776-55
- EAN: 4078500065580
- Item number: 3292320
- Maximum branch thickness: 2.8 cm
- Product colour: Black, Silver
- Ergonomic handle: Yes
- Material (blade): Steel
- Non-stick coated blade: Yes
- Power source: Battery
- Battery voltage: 18 V
- Battery technology: Lithium-Ion (Li-Ion)
- Warranty period: 3 years
The Gardena EnergyCut 750 A is an anvil lopper designed to handle thicker branches and more demanding pruning tasks in the garden. The built-in gear transmission increases cutting power, so even hard and dry branches can be cut with less effort.
The shears have precision-ground blades with a non-stick coating that reduces friction and ensures clean cuts that are gentle on plants. The low weight and ergonomically shaped handles in black and blue provide a secure and comfortable grip during use.
With a maximum cutting diameter of 4.2 cm, the EnergyCut 750 A is suitable for pruning both shrubs and small trees. The anvil design makes it particularly effective for hard and dead wood where extra power is required.
- Gear transmission: Increases cutting power when pruning thicker branches.
- Non-stick coating: Provides smooth cuts and reduces friction.
- Low weight: Makes the shears easier to handle during extended use.
- Ergonomic handles: Ensure a good and comfortable grip.
- Maximum cutting diameter: Up to 4.2 cm.
Pros and cons
- Effective gear transmission for increased cutting power
- Non-stick coating on the blade for easier cutting
- Low weight and ergonomic design
- Suitable for hard and dead wood
- No telescopic function, which limits reach
- The anvil lopper is best suited for hard wood and less for fresh, green branches
Pros and cons
Pros
- Effective gear transmission for increased cutting power
- Non-stick coating on the blade for easier cutting
- Low weight and ergonomic design
- Suitable for hard and dead wood
Cons
- No telescopic function, which limits reach
- The anvil lopper is best suited for hard wood and less for fresh, green branches
Pros
- Effective gear transmission for increased cutting power
- Non-stick coating on the blade for easier cutting
- Low weight and ergonomic design
- Suitable for hard and dead wood
Cons
- No telescopic function, which limits reach
- The anvil lopper is best suited for hard wood and less for fresh, green branches
Specifications
- Manufacturer: Gardena
- Model: 12008-20
- EAN: 4078500043489
- Item number: 2736842
- Construction: Anvil lopper
- Telescopic handle: No
- Maximum cutting diameter: 4.2 cm
- Handle colour: Black and blue
- Blade coating: Non-stick
The Gardena CS Anvil Branch Pruner - 297-20 is part of Gardena's combisystem and is designed to cut older and harder branches in taller trees. It can be used with a Gardena combisystem telescopic handle, allowing the user to work from the ground without the need for a ladder.
The shears have an integrated double and fivefold transmission, which provides significant power savings during pruning. The non-stick coated blade and the adjusted geometry ensure that the branch is held securely during cutting, resulting in a clean and precise cut.
An adjustable D-handle allows ergonomic work and good control. The cord, which is 4.7 metres long and tear-resistant, can be stored in the handle so that it does not tangle during use or storage. The shears can also be hung on branches to make work even easier.
The model can be used both with and without a handle and is designed to cut branches with a diameter of up to approximately 35 mm.
- Power-saving transmission: Double and fivefold transmission reduces the force required for pruning.
- Non-stick coated blade: Provides clean cuts and easy cleaning.
- Ergonomic D-handle: Adjustable handle with cord storage for better control and comfort.
- Long reach: Can be used with a telescopic handle for pruning at height.
- Tear-resistant cord: 4.7 metre long cord that can be attached on both sides of the handle.
Pros and cons
- Efficient power transmission via transmission system
- Can be used from the ground with a telescopic handle
- Non-stick coating for precise cuts
- Ergonomic and adjustable handle
- Long and durable cord
- Requires manual operation and physical effort
- Not suitable for very thick branches over approx. 35 mm
- Telescopic handle must be purchased separately
Pros and cons
Pros
- Efficient power transmission via transmission system
- Can be used from the ground with a telescopic handle
- Non-stick coating for precise cuts
- Ergonomic and adjustable handle
- Long and durable cord
Cons
- Requires manual operation and physical effort
- Not suitable for very thick branches over approx. 35 mm
- Telescopic handle must be purchased separately
Pros
- Efficient power transmission via transmission system
- Can be used from the ground with a telescopic handle
- Non-stick coating for precise cuts
- Ergonomic and adjustable handle
- Long and durable cord
Cons
- Requires manual operation and physical effort
- Not suitable for very thick branches over approx. 35 mm
- Telescopic handle must be purchased separately
Specifications
- Manufacturer: Gardena
- Series: Combisystem
- Model: 00297-20
- Product name: CS Anvil Branch Pruner
- Item number: 2564641
- EAN: 4078500012591
- Cord length: 4.7 metres
- Maximum branch diameter: approx. 35 mm
- Blade type: Anvil with non-stick coating
- Compatibility: Gardena combisystem telescopic handle
- Power source: Manual (not battery powered)
The Gardena SlimCut pruning shears are designed for precise and efficient pruning of shrubs and small trees. The long aluminium handle provides extra reach, making it easier to access dense vegetation without having to bend or use a ladder.
The shears are equipped with an integrated transmission that can be adjusted between two gear ratios – a powerful 1:12 for thicker branches and a faster 1:6 for thinner branches. This flexibility makes it possible to adjust the cutting power as needed.
The precision-ground blades have a non-stick coating that reduces friction and protects the plants during cutting. The combination of lightweight materials and ergonomic design makes the tool comfortable to use for extended periods.
- Long aluminium handle: Provides great reach when pruning shrubs and trees.
- Adjustable transmission: Switch between 1:12 and 1:6 gearing for optimal cutting power.
- Non-stick coating: Reduces friction and ensures clean cuts.
- Precision-ground blades: Provides precise and gentle cutting.
- Lightweight construction: Aluminium handle reduces weight and increases comfort.
Pros and cons
- Long reach thanks to the extended handle
- Ability to adjust cutting power according to branch thickness
- Non-stick coating for easier cutting and maintenance
- Lightweight and ergonomic design
- May be less suitable for very thick branches compared to larger loppers
- The long design may require some getting used to for precision work
Pros and cons
Pros
- Long reach thanks to the extended handle
- Ability to adjust cutting power according to branch thickness
- Non-stick coating for easier cutting and maintenance
- Lightweight and ergonomic design
Cons
- May be less suitable for very thick branches compared to larger loppers
- The long design may require some getting used to for precision work
Pros
- Long reach thanks to the extended handle
- Ability to adjust cutting power according to branch thickness
- Non-stick coating for easier cutting and maintenance
- Lightweight and ergonomic design
Cons
- May be less suitable for very thick branches compared to larger loppers
- The long design may require some getting used to for precision work
Specifications
- Manufacturer: Gardena
- Model: 12010-20
- Item number: 2736835
- EAN: 4078500043533
- Construction: Bypass loppers
- Telescopic handle: Yes
- Maximum cutting diameter: 2.9 cm
- Handle material: Aluminium
- Handle colour: Black
- Non-stick coated blade: Yes
The Gardena EasyCut 500 B is a classic lopper designed for pruning fresh wood. The low weight and ergonomically shaped handles make it possible to work comfortably and with minimal effort, even during extended use.
The shears are equipped with precision-ground blades that have a non-slip non-stick coating. This coating reduces friction during cutting and ensures a clean and precise cut that is gentle on the plants.
Buffers made of special plastic protect the user's joints by absorbing shocks during cutting work. The construction is of the bypass type, which means that the blade slides past the counter blade, providing a clean cut that is ideal for fresh branches.
With a maximum cutting diameter of 3.8 cm, the EasyCut 500 B is suitable for general pruning in the garden, where precision and easy handling are key.
- Lightweight: Makes the shears easy to handle and reduces fatigue during use.
- Ergonomic grip: Ensures comfort and control when pruning.
- Non-stick coating: Provides a clean cut and reduces friction.
- Bypass construction: Ideal for pruning fresh branches.
- Shock-absorbing buffers: Protect wrists and elbows during work.
Pros and cons
- Lightweight and ergonomic design
- Precision-ground blades with non-stick coating
- Effective for pruning fresh branches
- Shock-absorbing buffers for increased comfort
- Not suitable for dry or very hard branches
- No telescopic function for extra reach
Pros and cons
Pros
- Lightweight and ergonomic design
- Precision-ground blades with non-stick coating
- Effective for pruning fresh branches
- Shock-absorbing buffers for increased comfort
Cons
- Not suitable for dry or very hard branches
- No telescopic function for extra reach
Pros
- Lightweight and ergonomic design
- Precision-ground blades with non-stick coating
- Effective for pruning fresh branches
- Shock-absorbing buffers for increased comfort
Cons
- Not suitable for dry or very hard branches
- No telescopic function for extra reach
Specifications
- Manufacturer: Gardena
- Model: 12002-20
- EAN: 4078500043342
- Item number: 2736848
- Construction: Bypass lopper
- Telescopic handle: No
- Maximum cutting diameter: 3.8 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
Product descriptions
The Fiskars Pruning Shears with Bypass M (P921) are designed to provide an efficient and comfortable cutting experience when pruning fresh branches and plants. It uses PowerGear technology, which triples the power transmission and reduces the required hand force, especially for thicker branches.
The blades are made of hardened steel and have a rust-resistant, low-friction coating that ensures clean cuts and reduces resistance during use. The bypass blade makes it suitable for precision cutting of live plant material.
The handle is made of lightweight FiberComp material with SoftGrip details, which follow the natural shape of the hand and provide a secure and comfortable grip. A practical sliding lock protects the blades during transport and storage.
The shears are made without PVC and come with a 25-year warranty, underscoring the product's durability and quality.
- PowerGear mechanism: Increases cutting power and reduces strain on the hand.
- Precision-ground hardened steel blades: Retain sharpness over time and provide clean cuts.
- Low-friction coating: Reduces resistance and protects against rust.
- Ergonomic FiberComp handle: Lightweight and comfortable grip with SoftGrip details.
- Cutting capacity: Up to 24 mm in diameter.
- PVC-free construction: Made without PVC materials.
Pros and cons
- Efficient power transmission with PowerGear technology
- Ergonomic and lightweight handle with good grip
- Durable hardened steel blades with rust protection
- Suitable for precision cutting of fresh branches
- Long 25-year warranty
- Not intended for dry or very hard branches
- The medium size may be too small for very large hands
Pros and cons
Pros
- Efficient power transmission with PowerGear technology
- Ergonomic and lightweight handle with good grip
- Durable hardened steel blades with rust protection
- Suitable for precision cutting of fresh branches
- Long 25-year warranty
Cons
- Not intended for dry or very hard branches
- The medium size may be too small for very large hands
Pros
- Efficient power transmission with PowerGear technology
- Ergonomic and lightweight handle with good grip
- Durable hardened steel blades with rust protection
- Suitable for precision cutting of fresh branches
- Long 25-year warranty
Cons
- Not intended for dry or very hard branches
- The medium size may be too small for very large hands
Specifications
- Manufacturer: Fiskars
- Model: 1057173 (P921)
- Product type: Pruner with bypass
- Size: M
- Cutting capacity: 24 mm
- Blade material: Hardened steel with low-friction coating
- Handle material: FiberComp with SoftGrip
- Features: PowerGear mechanism, ergonomic design, rust-resistant, PVC-free
- Compliance standards: PVC-free
- Warranty: 25 years
- Width: 9.5 cm
- Depth: 4.4 cm
- Height: 28.5 cm
- Weight: 245 g
- EAN: 6411501111210
- Item number: 2957410
The Gardena EcoLine Secateur is a pair of pruning shears designed for precise and efficient cutting of flowers and small branches. It has a cutting capacity of up to 18 mm in diameter and uses bypass cutting technology, which provides clean cuts and protects the plants.
The shears are made with a focus on sustainability. The handle consists of plastic produced with over 80% recycled household waste, while more than 75% of the steel components used are made from recycled material. This provides a robust and durable tool with a timeless look.
The precision-ground stainless steel blades ensure sharp and reliable cutting performance. The ergonomic handle makes the shears comfortable to use, even during extended periods of garden work.
The EcoLine Secateur is equipped with practical features such as a sap groove and wire cutting function, and it can be locked with one hand for safe storage.
- Sustainable design: Made primarily from recycled materials.
- Precision blades: Stainless steel with bypass cutting technology for clean cuts.
- Ergonomic handle: Provides comfortable use during extended pruning.
- Practical features: Includes sap groove, wire cutting function, and one-hand lock.
- Cutting capacity: Up to 18 mm in diameter.
Pros and cons
- Eco-friendly choice with a high proportion of recycled materials
- Cuts precisely and cleanly thanks to the bypass principle
- Ergonomic and easy to handle
- Durable materials in stainless steel
- Not suitable for thicker branches over 18 mm
- May require regular cleaning to maintain cutting performance
Pros and cons
Pros
- Eco-friendly choice with a high proportion of recycled materials
- Cuts precisely and cleanly thanks to the bypass principle
- Ergonomic and easy to handle
- Durable materials in stainless steel
Cons
- Not suitable for thicker branches over 18 mm
- May require regular cleaning to maintain cutting performance
Pros
- Eco-friendly choice with a high proportion of recycled materials
- Cuts precisely and cleanly thanks to the bypass principle
- Ergonomic and easy to handle
- Durable materials in stainless steel
Cons
- Not suitable for thicker branches over 18 mm
- May require regular cleaning to maintain cutting performance
Specifications
- Manufacturer: Gardena
- Model: 12210-20
- Item number: 3053161
- EAN: 4078500057523
- Product type: Pruning shears (Secateurs)
- Cutting capacity: 18 mm (diameter)
- Blade material: Stainless steel
- Features: Bypass blade, ergonomic handle, one-hand safety lock, sap groove, wire cutting function
- Warranty: 25 years
The Bosch EasyPrune Cordless Garden Shears are compact, electric pruning shears designed to make gardening easier. They are equipped with Power Assist technology, which automatically adds extra power when resistance is detected, making it possible to cut branches up to 25 mm thick without much effort.
The shears are powered by a 3.6 V battery that provides up to 450 cuts per charge. The cordless design allows freedom of movement in the garden, and charging is done via the included micro-USB cable.
EasyPrune uses a bypass cutting system with two stainless steel blades that glide past each other to provide clean cuts that promote healthy plant growth. The built-in battery level indicator makes it easy to monitor the charging status.
Weighing only 490 grams and with an ergonomic design, the shears are suitable for extended use without unnecessary strain on the hand.
- Power Assist technology: Automatically adds extra power when resistance is detected for easier pruning.
- Bypass cutting system: Two stainless steel blades ensure clean cuts and healthy plant growth.
- Long battery life: Up to 450 cuts per charge with a 3.6 V battery.
- Cordless freedom: Provides flexibility to work anywhere in the garden.
- Lightweight and ergonomic: Only 490 g for comfortable handling.
Pros and cons
- Automatic power assistance reduces the need for hand strength
- Long battery life per charge
- Clean cuts with stainless steel bypass blades
- Lightweight and ergonomic design
- Easy charging via micro-USB
- Not suitable for very thick or hard branches over 25 mm
- The battery is built-in and cannot be replaced
Pros and cons
Pros
- Automatic power assistance reduces the need for hand strength
- Long battery life per charge
- Clean cuts with stainless steel bypass blades
- Lightweight and ergonomic design
- Easy charging via micro-USB
Cons
- Not suitable for very thick or hard branches over 25 mm
- The battery is built-in and cannot be replaced
Pros
- Automatic power assistance reduces the need for hand strength
- Long battery life per charge
- Clean cuts with stainless steel bypass blades
- Lightweight and ergonomic design
- Easy charging via micro-USB
Cons
- Not suitable for very thick or hard branches over 25 mm
- The battery is built-in and cannot be replaced
Specifications
- Manufacturer: Bosch
- Model: 06008B2102
- EAN: 4059952647401
- Product type: Electric, cordless pruning shears (secateur)
- Battery: 3.6 V lithium-ion
- Maximum cutting capacity: 25 mm
- Features: Power Assist, bypass blade, battery level indicator, stainless steel blade, up to 450 cuts per charge
- Included accessories: Micro-USB cable
- Compliance standards: EN 60745
- Sound pressure: 70 dB(A)
- Vibration emission: 2.5 m/s² (uncertainty K: 1.5 m/s²)
- Dimensions (W × D × H): 3.1 × 25 × 8.5 cm
- Weight: 490 g
The FELCO 13 Classic Secateurs are pruning shears developed for demanding pruning tasks where extra power and control are needed. They can be used with one or two hands, allowing the user to take advantage of the extended left handle arm to increase cutting power.
The shears are made of forged aluminium and rubber, providing a combination of low weight and high durability. The red handles ensure a good grip and make the tool easy to find in the garden.
The blade is made of hardened steel and can cut branches up to 30 mm in diameter. The micrometric adjustment mechanism allows precise adjustment of the cutting head, ensuring the shears maintain their efficiency over time.
Ergonomics are considered in every detail – from the shock-absorbing handles and anti-slip coating to the double-notched thumb rest, which provides a stable and comfortable grip during work.
- Flexible use: Can be used with one or two hands for increased cutting power.
- Durable materials: Forged aluminium and hardened steel ensure long life.
- Ergonomic design: Shock-absorbing and non-slip handles protect the wrist and provide comfort.
- Precise adjustment: Micrometric mechanism makes it easy to fine-tune the cutting head.
- Large cutting capacity: Handles branches up to 30 mm in diameter.
Pros and cons
- Can be used with both one and two hands for extra power
- Ergonomic and shock-absorbing handles
- Precise adjustment of the cutting head
- Robust construction in forged aluminium and hardened steel
- Lifetime warranty from the manufacturer
- May feel large for users with small hands
- The solid construction makes it slightly heavier than smaller models
Pros and cons
Pros
- Can be used with both one and two hands for extra power
- Ergonomic and shock-absorbing handles
- Precise adjustment of the cutting head
- Robust construction in forged aluminium and hardened steel
- Lifetime warranty from the manufacturer
Cons
- May feel large for users with small hands
- The solid construction makes it slightly heavier than smaller models
Pros
- Can be used with both one and two hands for extra power
- Ergonomic and shock-absorbing handles
- Precise adjustment of the cutting head
- Robust construction in forged aluminium and hardened steel
- Lifetime warranty from the manufacturer
Cons
- May feel large for users with small hands
- The solid construction makes it slightly heavier than smaller models
Specifications
- Manufacturer: FELCO
- Model: F13
- Item number: 3087519
- EAN: 0783929100173
- Product type: Pruner – large hand
- Length: 27 cm
- Weight: 310 g
- Cutting capacity: 30 mm (diameter)
- Blade material: Hardened steel
- Handle material: Forged aluminium/rubber
- Colour: Red handles
- Features: Shock-absorbing handles, non-stick coating, right-/left-handed, ergonomic handle, lockable, phthalate-free, anti-slip handle, sap groove, wire cutter, angled cutting head, one-handed operation, robust, extra-long left handle, double-notched thumb rest, micrometric adjustment mechanism
- Warranty: Lifetime warranty
The Gardena EasyCut 680 A is an anvil lopper developed to cut hard and dry wood with minimal effort. Its low weight and ergonomic grip make it comfortable to use, even during extended pruning sessions.
The precision-ground blades have a non-slip non-stick coating that ensures clean cuts and reduces friction during work. The anvil design means that one blade meets a fixed anvil, providing extra power when cutting tougher branches.
The shears have a maximum cutting diameter of 3.5 cm and feature a design with black and blue handles. They are suitable for general gardening tasks that require precision and control when pruning dry branches.
- Anvil lopper: Effective for pruning hard and dry wood.
- Non-stick coating: Reduces friction and ensures clean cuts.
- Lightweight: Makes work easier and more comfortable.
- Ergonomic grip: Provides good control during pruning.
- Cutting diameter: Up to 3.5 cm.
Pros and cons
- Lightweight construction that reduces fatigue during use
- Non-stick coating for smooth and precise cuts
- Suitable for hard and dry wood
- Ergonomic design with a good grip
- Not telescopic, so the reach is limited
- Less suitable for fresh or very thick wood
Pros and cons
Pros
- Lightweight construction that reduces fatigue during use
- Non-stick coating for smooth and precise cuts
- Suitable for hard and dry wood
- Ergonomic design with a good grip
Cons
- Not telescopic, so the reach is limited
- Less suitable for fresh or very thick wood
Pros
- Lightweight construction that reduces fatigue during use
- Non-stick coating for smooth and precise cuts
- Suitable for hard and dry wood
- Ergonomic design with a good grip
Cons
- Not telescopic, so the reach is limited
- Less suitable for fresh or very thick wood
Specifications
- Manufacturer: Gardena
- Model: 12004-20
- EAN: 4078500043403
- Item number: 2736841
- Construction: Anvil lopper
- Telescopic handle: No
- Maximum cutting diameter: 3.5 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
The Gardena EnergyCut 750 B is a lopper developed for demanding pruning tasks where extra power is needed. The built-in gear transmission significantly increases cutting power, allowing even thicker branches to be cut with less effort.
The shears are equipped with precision-ground blades that have a non-stick coating, which reduces friction and ensures clean cuts. This contributes to gentle pruning that minimises the risk of damage to the plants.
The handles are made of lightweight material and have an ergonomic design with a non-slip grip, providing good control and comfort during work. Buffers made of special plastic protect wrists and elbows by absorbing shocks during cutting.
With a maximum cutting diameter of 3.8 cm and a construction based on the bypass principle, this model is suitable for fresh wood and live branches, where a clean cut is important for the plant’s healing.
- Gear transmission: Increases cutting power when pruning thicker branches.
- Non-stick coating: Provides smooth cuts and reduces friction.
- Ergonomic design: Lightweight construction and non-slip grip for better comfort.
- Bypass construction: Ideal for fresh wood and live branches.
- Shock-absorbing buffers: Protect joints and reduce strain during use.
Pros and cons
- Effective gear transmission for increased cutting power
- Lightweight and well-balanced construction
- Non-stick coating on the blade for clean cuts
- Ergonomic handles with good grip
- Suitable for fresh wood and live branches
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Pros and cons
Pros
- Effective gear transmission for increased cutting power
- Lightweight and well-balanced construction
- Non-stick coating on the blade for clean cuts
- Ergonomic handles with good grip
- Suitable for fresh wood and live branches
Cons
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Pros
- Effective gear transmission for increased cutting power
- Lightweight and well-balanced construction
- Non-stick coating on the blade for clean cuts
- Ergonomic handles with good grip
- Suitable for fresh wood and live branches
Cons
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Specifications
- Manufacturer: Gardena
- Model: 12007-20
- EAN: 4078500043465
- Item number: 2736844
- Construction: Bypass (bypass lopper)
- Telescopic handle: No
- Maximum cutting diameter: 3.8 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
The Gardena 14776-55 electric pruner is a battery-powered telescopic pruner that allows you to trim branches at height directly from the ground. With an integrated extension tube, the tool can reach up to 3.6 metres, providing a total working height of around 5 metres.
The blades are made of hardened steel and have a non-stick coating that reduces friction and prevents branches from sticking. The maximum branch thickness the pruner can handle is 2.8 cm, making it suitable for pruning fresh wood.
A rotating cutting head with a 60-degree angle provides better access to difficult branches and a good overview during work. The ergonomic handle is equipped with an LED indicator that shows the battery's charge status.
The pruner is powered by an 18 V lithium-ion battery from the POWER FOR ALL system, which can be used across compatible Gardena products. The model is supplied without battery and charger, making it ideal for users who already have equipment in the same battery series.
- Telescopic function: Adjustable length up to 3.6 metres for high-level pruning.
- Efficient cutting capacity: Handles branches up to 2.8 cm in diameter.
- Non-stick coating: Reduces friction and makes cleaning easier.
- Rotating cutting head: Provides flexibility and precision when pruning.
- Battery operation: 18 V lithium-ion battery from the POWER FOR ALL system.
Pros and cons
- Long reach with telescopic function
- Ergonomic handle with LED battery indicator
- Non-stick coating on the blades
- Compatible with the POWER FOR ALL battery system
- Easy to store thanks to the detachable shaft
- Supplied without battery and charger
- Not suitable for very thick or hard branches
Pros and cons
Pros
- Long reach with telescopic function
- Ergonomic handle with LED battery indicator
- Non-stick coating on the blades
- Compatible with the POWER FOR ALL battery system
- Easy to store thanks to the detachable shaft
Cons
- Supplied without battery and charger
- Not suitable for very thick or hard branches
Pros
- Long reach with telescopic function
- Ergonomic handle with LED battery indicator
- Non-stick coating on the blades
- Compatible with the POWER FOR ALL battery system
- Easy to store thanks to the detachable shaft
Cons
- Supplied without battery and charger
- Not suitable for very thick or hard branches
Specifications
- Manufacturer: Gardena
- Model: 14776-55
- EAN: 4078500065580
- Item number: 3292320
- Maximum branch thickness: 2.8 cm
- Product colour: Black, Silver
- Ergonomic handle: Yes
- Material (blade): Steel
- Non-stick coated blade: Yes
- Power source: Battery
- Battery voltage: 18 V
- Battery technology: Lithium-Ion (Li-Ion)
- Warranty period: 3 years
The Gardena EnergyCut 750 A is an anvil lopper designed to handle thicker branches and more demanding pruning tasks in the garden. The built-in gear transmission increases cutting power, so even hard and dry branches can be cut with less effort.
The shears have precision-ground blades with a non-stick coating that reduces friction and ensures clean cuts that are gentle on plants. The low weight and ergonomically shaped handles in black and blue provide a secure and comfortable grip during use.
With a maximum cutting diameter of 4.2 cm, the EnergyCut 750 A is suitable for pruning both shrubs and small trees. The anvil design makes it particularly effective for hard and dead wood where extra power is required.
- Gear transmission: Increases cutting power when pruning thicker branches.
- Non-stick coating: Provides smooth cuts and reduces friction.
- Low weight: Makes the shears easier to handle during extended use.
- Ergonomic handles: Ensure a good and comfortable grip.
- Maximum cutting diameter: Up to 4.2 cm.
Pros and cons
- Effective gear transmission for increased cutting power
- Non-stick coating on the blade for easier cutting
- Low weight and ergonomic design
- Suitable for hard and dead wood
- No telescopic function, which limits reach
- The anvil lopper is best suited for hard wood and less for fresh, green branches
Pros and cons
Pros
- Effective gear transmission for increased cutting power
- Non-stick coating on the blade for easier cutting
- Low weight and ergonomic design
- Suitable for hard and dead wood
Cons
- No telescopic function, which limits reach
- The anvil lopper is best suited for hard wood and less for fresh, green branches
Pros
- Effective gear transmission for increased cutting power
- Non-stick coating on the blade for easier cutting
- Low weight and ergonomic design
- Suitable for hard and dead wood
Cons
- No telescopic function, which limits reach
- The anvil lopper is best suited for hard wood and less for fresh, green branches
Specifications
- Manufacturer: Gardena
- Model: 12008-20
- EAN: 4078500043489
- Item number: 2736842
- Construction: Anvil lopper
- Telescopic handle: No
- Maximum cutting diameter: 4.2 cm
- Handle colour: Black and blue
- Blade coating: Non-stick
The Gardena CS Anvil Branch Pruner - 297-20 is part of Gardena's combisystem and is designed to cut older and harder branches in taller trees. It can be used with a Gardena combisystem telescopic handle, allowing the user to work from the ground without the need for a ladder.
The shears have an integrated double and fivefold transmission, which provides significant power savings during pruning. The non-stick coated blade and the adjusted geometry ensure that the branch is held securely during cutting, resulting in a clean and precise cut.
An adjustable D-handle allows ergonomic work and good control. The cord, which is 4.7 metres long and tear-resistant, can be stored in the handle so that it does not tangle during use or storage. The shears can also be hung on branches to make work even easier.
The model can be used both with and without a handle and is designed to cut branches with a diameter of up to approximately 35 mm.
- Power-saving transmission: Double and fivefold transmission reduces the force required for pruning.
- Non-stick coated blade: Provides clean cuts and easy cleaning.
- Ergonomic D-handle: Adjustable handle with cord storage for better control and comfort.
- Long reach: Can be used with a telescopic handle for pruning at height.
- Tear-resistant cord: 4.7 metre long cord that can be attached on both sides of the handle.
Pros and cons
- Efficient power transmission via transmission system
- Can be used from the ground with a telescopic handle
- Non-stick coating for precise cuts
- Ergonomic and adjustable handle
- Long and durable cord
- Requires manual operation and physical effort
- Not suitable for very thick branches over approx. 35 mm
- Telescopic handle must be purchased separately
Pros and cons
Pros
- Efficient power transmission via transmission system
- Can be used from the ground with a telescopic handle
- Non-stick coating for precise cuts
- Ergonomic and adjustable handle
- Long and durable cord
Cons
- Requires manual operation and physical effort
- Not suitable for very thick branches over approx. 35 mm
- Telescopic handle must be purchased separately
Pros
- Efficient power transmission via transmission system
- Can be used from the ground with a telescopic handle
- Non-stick coating for precise cuts
- Ergonomic and adjustable handle
- Long and durable cord
Cons
- Requires manual operation and physical effort
- Not suitable for very thick branches over approx. 35 mm
- Telescopic handle must be purchased separately
Specifications
- Manufacturer: Gardena
- Series: Combisystem
- Model: 00297-20
- Product name: CS Anvil Branch Pruner
- Item number: 2564641
- EAN: 4078500012591
- Cord length: 4.7 metres
- Maximum branch diameter: approx. 35 mm
- Blade type: Anvil with non-stick coating
- Compatibility: Gardena combisystem telescopic handle
- Power source: Manual (not battery powered)
The Gardena SlimCut pruning shears are designed for precise and efficient pruning of shrubs and small trees. The long aluminium handle provides extra reach, making it easier to access dense vegetation without having to bend or use a ladder.
The shears are equipped with an integrated transmission that can be adjusted between two gear ratios – a powerful 1:12 for thicker branches and a faster 1:6 for thinner branches. This flexibility makes it possible to adjust the cutting power as needed.
The precision-ground blades have a non-stick coating that reduces friction and protects the plants during cutting. The combination of lightweight materials and ergonomic design makes the tool comfortable to use for extended periods.
- Long aluminium handle: Provides great reach when pruning shrubs and trees.
- Adjustable transmission: Switch between 1:12 and 1:6 gearing for optimal cutting power.
- Non-stick coating: Reduces friction and ensures clean cuts.
- Precision-ground blades: Provides precise and gentle cutting.
- Lightweight construction: Aluminium handle reduces weight and increases comfort.
Pros and cons
- Long reach thanks to the extended handle
- Ability to adjust cutting power according to branch thickness
- Non-stick coating for easier cutting and maintenance
- Lightweight and ergonomic design
- May be less suitable for very thick branches compared to larger loppers
- The long design may require some getting used to for precision work
Pros and cons
Pros
- Long reach thanks to the extended handle
- Ability to adjust cutting power according to branch thickness
- Non-stick coating for easier cutting and maintenance
- Lightweight and ergonomic design
Cons
- May be less suitable for very thick branches compared to larger loppers
- The long design may require some getting used to for precision work
Pros
- Long reach thanks to the extended handle
- Ability to adjust cutting power according to branch thickness
- Non-stick coating for easier cutting and maintenance
- Lightweight and ergonomic design
Cons
- May be less suitable for very thick branches compared to larger loppers
- The long design may require some getting used to for precision work
Specifications
- Manufacturer: Gardena
- Model: 12010-20
- Item number: 2736835
- EAN: 4078500043533
- Construction: Bypass loppers
- Telescopic handle: Yes
- Maximum cutting diameter: 2.9 cm
- Handle material: Aluminium
- Handle colour: Black
- Non-stick coated blade: Yes
The Gardena EasyCut 500 B is a classic lopper designed for pruning fresh wood. The low weight and ergonomically shaped handles make it possible to work comfortably and with minimal effort, even during extended use.
The shears are equipped with precision-ground blades that have a non-slip non-stick coating. This coating reduces friction during cutting and ensures a clean and precise cut that is gentle on the plants.
Buffers made of special plastic protect the user's joints by absorbing shocks during cutting work. The construction is of the bypass type, which means that the blade slides past the counter blade, providing a clean cut that is ideal for fresh branches.
With a maximum cutting diameter of 3.8 cm, the EasyCut 500 B is suitable for general pruning in the garden, where precision and easy handling are key.
- Lightweight: Makes the shears easy to handle and reduces fatigue during use.
- Ergonomic grip: Ensures comfort and control when pruning.
- Non-stick coating: Provides a clean cut and reduces friction.
- Bypass construction: Ideal for pruning fresh branches.
- Shock-absorbing buffers: Protect wrists and elbows during work.
Pros and cons
- Lightweight and ergonomic design
- Precision-ground blades with non-stick coating
- Effective for pruning fresh branches
- Shock-absorbing buffers for increased comfort
- Not suitable for dry or very hard branches
- No telescopic function for extra reach
Pros and cons
Pros
- Lightweight and ergonomic design
- Precision-ground blades with non-stick coating
- Effective for pruning fresh branches
- Shock-absorbing buffers for increased comfort
Cons
- Not suitable for dry or very hard branches
- No telescopic function for extra reach
Pros
- Lightweight and ergonomic design
- Precision-ground blades with non-stick coating
- Effective for pruning fresh branches
- Shock-absorbing buffers for increased comfort
Cons
- Not suitable for dry or very hard branches
- No telescopic function for extra reach
Specifications
- Manufacturer: Gardena
- Model: 12002-20
- EAN: 4078500043342
- Item number: 2736848
- Construction: Bypass lopper
- Telescopic handle: No
- Maximum cutting diameter: 3.8 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
Other products
The Gardena TeleCut 650-900 B pruning shears are designed to cut fresh wood with precision and minimal effort. The low weight and ergonomic grip make it comfortable to use, even for extended periods of work.
The telescopic lever arms can be adjusted in length, providing better reach for higher branches and increased cutting power. Buffers made of special plastic protect the user's joints during work.
The blades are precision-ground and have a non-stick coating that ensures clean cuts and reduces friction. The bypass design makes it suitable for pruning fresh branches without damaging the plant.
- Telescopic handles: Adjustable length from 650 to 900 mm for better reach.
- Lightweight construction: Makes it easy to work for longer periods without fatigue.
- Precision-ground blade: Provides clean and precise cuts in fresh wood.
- Non-stick coating: Reduces friction and protects plants during cutting.
- Ergonomic design: Buffers made of special plastic protect joints and provide comfortable use.
Pros and cons
- Lightweight and ergonomic grip
- Telescopic handles for increased reach
- Non-stick coating on the blade
- Suitable for fresh branches
- Not intended for hard or dry wood
- The product has been discontinued and may be difficult to find in stock
Pros and cons
Pros
- Lightweight and ergonomic grip
- Telescopic handles for increased reach
- Non-stick coating on the blade
- Suitable for fresh branches
Cons
- Not intended for hard or dry wood
- The product has been discontinued and may be difficult to find in stock
Pros
- Lightweight and ergonomic grip
- Telescopic handles for increased reach
- Non-stick coating on the blade
- Suitable for fresh branches
Cons
- Not intended for hard or dry wood
- The product has been discontinued and may be difficult to find in stock
Specifications
- Manufacturer: Gardena
- Model: 12009-20
- EAN: 4078500043519
- Item number: 2736837
- Construction: Bypass loppers
- Telescopic handle: Yes (650–900 mm)
- Cutting diameter (max): 3.8 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
The Gardena TeleCut 520-670 B pruning shears are designed to cut fresh wood with precision and minimal effort. The low weight and ergonomic grip make it comfortable to use, even during extended pruning sessions.
The telescopic lever arms can be adjusted in length, providing better reach for higher branches and increased power transmission when cutting. Buffers made of special plastic protect wrists and elbows from shocks during work.
The blades are precision-ground and have a non-slip non-stick coating, ensuring clean cuts and reducing friction. The combination of bypass blades and gentle cutting technique makes it suitable for the care of living plants and shrubs.
- Telescopic handles: Adjustable length from 520 to 670 mm for better reach.
- Lightweight construction: Reduces fatigue during extended use.
- Precision-ground blade: Provides clean and precise cuts in fresh wood.
- Non-stick coating: Reduces friction and protects plants.
- Shock-absorbing buffers: Protect joints and provide more comfortable pruning.
Pros and cons
- Adjustable telescopic arms provide flexible reach
- Lightweight and ergonomic design
- Non-stick coating for easier cutting
- Suitable for fresh branches and living plants
- Not intended for dry or very hard branches
- The product has been discontinued and may be difficult to find in stock
Pros and cons
Pros
- Adjustable telescopic arms provide flexible reach
- Lightweight and ergonomic design
- Non-stick coating for easier cutting
- Suitable for fresh branches and living plants
Cons
- Not intended for dry or very hard branches
- The product has been discontinued and may be difficult to find in stock
Pros
- Adjustable telescopic arms provide flexible reach
- Lightweight and ergonomic design
- Non-stick coating for easier cutting
- Suitable for fresh branches and living plants
Cons
- Not intended for dry or very hard branches
- The product has been discontinued and may be difficult to find in stock
Specifications
- Manufacturer: Gardena
- Model: 12005-20
- EAN: 4078500043427
- Item number: 2736839
- Construction: Bypass loppers
- Telescopic handle: Yes (520–670 mm)
- Cutting diameter (max): 3.8 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
The Gardena city gardening Balcony pruning shears are designed for pruning plants in smaller outdoor spaces such as balconies and terraces. The shears are suitable for cutting flowers, herbs and thin branches, making them ideal for both decorative and practical purposes in urban gardens.
The blades are made of stainless steel, providing durable and corrosion-resistant cutting performance. The handles have two adjustable positions, allowing the user to adapt the grip to the task and achieve better control during cutting.
An integrated safety lock system allows the shears to be stored safely when not in use. The combination of functionality and compact design makes them suitable for use in small garden spaces where space is limited.
- For balcony and terrace: Designed for pruning flowers, herbs and thin branches in smaller outdoor spaces.
- Stainless steel blades: Provide precise cuts and long lifespan.
- Adjustable handles: Two positions for better ergonomics and control.
- Safety lock: Makes storage and handling safer.
- Compact design: Easy to handle and ideal for urban gardens.
Pros and cons
- Lightweight and compact construction
- Stainless steel blades for durability
- Ergonomic handles with adjustable position
- Built-in safety lock
- Primarily suitable for smaller branches and plants
- The product has been discontinued and may be difficult to find on the market
Pros and cons
Pros
- Lightweight and compact construction
- Stainless steel blades for durability
- Ergonomic handles with adjustable position
- Built-in safety lock
Cons
- Primarily suitable for smaller branches and plants
- The product has been discontinued and may be difficult to find on the market
Pros
- Lightweight and compact construction
- Stainless steel blades for durability
- Ergonomic handles with adjustable position
- Built-in safety lock
Cons
- Primarily suitable for smaller branches and plants
- The product has been discontinued and may be difficult to find on the market
Specifications
- Manufacturer: Gardena
- Model: 8707-20
- Item number: 2922353
- EAN: 4078500030380
- Cutting system: Bypass
- Handle colour: Blue
- Blade material: Stainless steel
- Built-in safety lock: Yes
The Gardena EasyCut 680 B is a classic pruning shear designed for cutting fresh wood. The low weight and ergonomically shaped handles make it possible to work comfortably and with less effort.
The shears are equipped with precision-ground blades that have a non-slip non-stick coating, ensuring clean and precise cuts. The bypass design means it is particularly suitable for fresh branches, where a clean cut promotes healthy growth.
Buffers made of special plastic reduce strain on hands and joints during use, making it comfortable to work with for longer periods. The combination of functional design and durable materials makes it a practical tool in any garden.
- Lightweight: Makes pruning easier and less strenuous.
- Ergonomic grip: Ensures comfortable handling during work.
- Precision-ground blades: Provide clean and precise cuts in fresh wood.
- Non-stick coating: Reduces friction and prevents the blade from sticking.
- Bypass design: Ideal for pruning fresh branches.
Pros and cons
- Lightweight and easy to handle
- Ergonomic design with good balance
- Non-stick coating for smooth cuts
- Suitable for fresh branches up to 3.8 cm in diameter
- Not intended for dry or hard branches
- Lack of telescopic handles limits reach
Pros and cons
Pros
- Lightweight and easy to handle
- Ergonomic design with good balance
- Non-stick coating for smooth cuts
- Suitable for fresh branches up to 3.8 cm in diameter
Cons
- Not intended for dry or hard branches
- Lack of telescopic handles limits reach
Pros
- Lightweight and easy to handle
- Ergonomic design with good balance
- Non-stick coating for smooth cuts
- Suitable for fresh branches up to 3.8 cm in diameter
Cons
- Not intended for dry or hard branches
- Lack of telescopic handles limits reach
Specifications
- Manufacturer: Gardena
- Model: 12003-20
- Item number: 2736847
- EAN: 4078500043366
- Design: Bypass
- Telescopic handles: No
- Maximum cutting diameter: 3.8 cm
- Handle colour: Black and blue
- Blade coating: Non-stick
The Gardena EnergyCut 600 B is a lopper developed to handle thicker branches and more demanding pruning tasks. The built-in gear transmission increases cutting power, allowing the user to work efficiently without applying unnecessary force.
The shears have a low weight and ergonomically designed handles that provide a secure and comfortable grip during use. Buffers made of special plastic reduce strain on wrists and elbows, making longer work sessions more comfortable.
The precision-ground blades are equipped with a non-slip non-stick coating that ensures clean cuts and reduces friction during cutting. The construction is of the bypass type, meaning the blade slides past the counter blade for a precise and gentle cut.
The blade can be replaced, extending the product’s lifespan and making maintenance simple.
- Gear transmission: Increases cutting power when pruning thicker branches.
- Low weight: Makes the shears easier to handle during extended use.
- Ergonomic design: Comfortable handles with a good grip.
- Non-stick coating: Reduces friction and ensures clean cuts.
- Replaceable blade: Extends the tool’s lifespan.
Pros and cons
- Efficient power transfer via gear transmission
- Lightweight and ergonomic construction
- Non-stick coating for precise cuts
- Replaceable blade for easy maintenance
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Pros and cons
Pros
- Efficient power transfer via gear transmission
- Lightweight and ergonomic construction
- Non-stick coating for precise cuts
- Replaceable blade for easy maintenance
Cons
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Pros
- Efficient power transfer via gear transmission
- Lightweight and ergonomic construction
- Non-stick coating for precise cuts
- Replaceable blade for easy maintenance
Cons
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Specifications
- Manufacturer: Gardena
- Model: 12006-20
- Item number: 2736838
- EAN: 4078500043441
- Construction: Bypass lopper
- Telescopic handle: No
- Maximum cutting diameter: 3.8 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
Different types of pruning shears
Pruning shears come in many varieties, each suited to different types of gardening tasks. Here’s an overview of the most common types.
1. Manual pruning shears
The classic pruning shear is manual and requires hand strength. It’s ideal for smaller pruning tasks and offers great control. Manual models come in both bypass and anvil versions and are often the obvious choice for general garden use.
2. Loppers
Loppers have longer arms that provide extra power and reach. They are used for thicker branches where a regular pruning shear isn’t sufficient. Many models have telescopic arms, allowing you to reach high branches in trees or bushes.
3. Ratchet shears
Ratchet shears (also called step-cut shears) use a mechanical system that increases cutting power by cutting in several stages. This makes them suitable for people with less hand strength or for harder branches.
4. Electric and battery-powered pruning shears
These models are motor-driven and require minimal hand effort. They are ideal for larger gardens or professional users who prune frequently. Battery-powered models offer cordless freedom, while electric models are typically lighter and more powerful.
5. Telescopic pruning shears
Telescopic pruning shears combine reach with precision. They are used for pruning high branches without a ladder and can often be adjusted in length. Some models also have gear mechanisms that make it easier to cut thick branches.
Different brands of pruning shears
The market for pruning shears offers many well-known manufacturers, each with their own focus and strengths.
Fiskars
Fiskars is one of the most popular brands in garden tools. Their pruning shears are known for ergonomic design, sharp blades, and durability. The range includes manual, telescopic, and battery-powered models.
Gardena
Gardena offers a wide selection of pruning shears for both hobby and leisure gardeners. The brand emphasises user-friendliness, safety, and comfort, and many models feature innovative details such as adjustable grips and shock absorption.
Bahco
Bahco is a professional brand often used by gardeners and landscapers. Their pruning shears are known for precision, high quality, and replaceable parts, making them suitable for intensive use.
Felco
Felco is a Swiss brand specialising in pruning tools. Their products are renowned for quality and ergonomics, and many models can be repaired and serviced with spare parts, extending their lifespan.
Wolf-Garten
Wolf-Garten offers a wide range of garden tools, including pruning shears focused on comfort and efficiency. Many of their models have gear mechanisms that make it easier to cut hard branches.
Frequently asked questions
Which type of pruning shear should I choose?
It depends on what you’re pruning. For fresh branches and flowers, a bypass shear is best, while an anvil shear is suitable for dry or hard branches. For larger branches, a lopper or electric model may be necessary.
How do I maintain my pruning shears?
Clean the shears after use, especially if you’ve cut diseased plants. Wipe the blades, lubricate moving parts with a little oil, and sharpen the blade regularly to maintain a clean cut.
Can I use the same shear for all types of plants?
In many cases, yes, but it’s beneficial to have several types of shears for different tasks. A small, precise shear for flowers and a stronger model for bushes and trees will give better results.
How often should I replace my pruning shears?
A quality shear can last for many years if properly maintained. If the blades become bent, the spring weakens, or the shear no longer cuts cleanly, it may be time to replace it.
Are electric pruning shears safe to use?
Yes, most models have safety locks and automatic stop functions. However, it’s important to follow the manufacturer’s instructions and wear protective gloves to avoid injury.
Læs også:
